Call or Text: 857-209-6904 to Schedule Service or Install
Log in Sign up
Cart (0)

How to change a battery for a liftmaster remote

Posted by Scott Moses on

How to Change a Battery on a LiftMaster Remote on the South Shore (Near Braintree, MA)

If your garage door remote is getting weak, working only sometimes, or you have to press the button repeatedly, there’s a good chance it’s just a dying battery. This quick guide is built for homeowners near Braintree, MA and throughout the South Shore—so you can swap the battery fast and keep your LiftMaster remote working reliably.

Local tip: If a new battery doesn’t fix it, the issue is often the opener, wall control, safety sensors, or programming—not the remote. We can diagnose it quickly.

LiftMaster garage door remote battery replacement near Braintree MA
Most LiftMaster remotes open with a small notch or a screw on the back.
LiftMaster remote coin cell battery orientation plus and minus
Match the + / − orientation exactly as shown inside the remote.

Helpful Lynoka Links (Braintree + South Shore)

Signs Your LiftMaster Remote Battery Is Dying

  • You need to press the button multiple times
  • The remote works only up close (reduced range)
  • The indicator light is dim or inconsistent (on some remotes)
  • The remote works “sometimes,” especially in cold weather

What You’ll Need

  • A replacement battery (type depends on your LiftMaster remote model)
  • Small flathead screwdriver (or a small Phillips screwdriver if your remote has screws)
  • A clean surface so you don’t lose small parts

Local Pro Tip

Before you open the remote, take a quick photo of the inside once it’s open—so you can match the battery orientation perfectly when installing the new one.

How to Change a Battery on a LiftMaster Remote (Step-by-Step)

  1. Identify the battery type. Many LiftMaster remotes use a coin-cell style battery, but it depends on the model. If you’re unsure, open the remote first and read the battery label.
  2. Open the remote casing. Look for a small notch on the side/back or a screw on the rear. Use a small screwdriver to gently separate the case (don’t force it).
  3. Remove the old battery. Carefully pop it out without bending contacts or damaging the board.
  4. Install the new battery the correct way. Match the + / − orientation exactly as marked inside the remote.
  5. Close the casing and test. Press the remote button and confirm the garage door responds normally.

If the remote still doesn’t work after a battery swap, jump to the troubleshooting section below—or book help here: opener & remote service near Braintree.

If the New Battery Doesn’t Fix It

Remote Needs Reprogramming

Sometimes the remote loses pairing. Follow this guide: program a LiftMaster remote.

Keypad or Wall Button Works, Remote Doesn’t

That can point to a remote issue—but it can also be interference or an opener receiver problem. We can test quickly.

Door Won’t Close

If the opener runs but the door won’t close, the photo-eye sensors may be misaligned or blocked. See: opener repair.

Serving Braintree and surrounding South Shore towns—see our coverage: Service Areas.

Need Help With a LiftMaster Remote Near Braintree, MA?

If you swapped the battery and it still isn’t working, Lynoka Garage Door Services can diagnose the remote, opener, keypad, sensors, and the full garage door system—fast and safely.